- Through shelves
- Descritpion
- Through shelves, also known as Rack Corridor or into the rack. Racking use tray access mode for less variety, volume type of cargo storage. Through shelves except near the channel of cargo space, due to the need to enter the shelves inside the truck access to the goods, generally sided pickup recommends no more than seven cargo space depth. To improve the speed of the truck, you can choose to configure the guide rail according to actual needs, compared with rack-shelf, through shelves (Drive-in shelf) library space utilization can be increased by 30%, through shelves (Drive-in shelf) is widely used in cold storage and food and tobacco industries.
Racking can be configured as required according to the guide rail.
Through shelves in the same amount of space is almost twice as much storage capacity than the conventional pallet racking, because of the abolition of roadway located between the rows of shelves, the shelves are combined to make the same floor, in the same column of the goods then another, maximum limits to increase capacity utilization.
Racking is widely used for high-volume, less variety of cargo storage, such goods are packaged unified, single product, such as: food, tobacco, cold storage and other warehouse.
1. On the support rail, storage tray according to the depth direction, followed by a one, which makes the high-density storage possible.
2. Access of goods from the shelves and out of the same side, after the first deposit to take, after take the first deposit, counterbalanced and reach trucks can easily access the goods into the middle shelf, without taking up a number of channels.
3. Such shelves for storing large quantities, less variety through shelves (Drive-in shelf) of shelf bracket and bracket are made whole stamping / rolling technology, has a strong bearing capacity, appearance goods.
4 through shelves full plug assembly structure, column-piece assembly structure, the total depth of the shelf against the wall region are generally best controlled within five pallets deep, with a total depth of the shelves and out of both sides of the middle region can best control in general 10 pallets deep within, in order to improve the efficiency and reliability of the forklift access.
Racking system stability is that all kinds of shelves relatively weak, for the shelves should not be too high, generally less than 10m, additional system still need to add Shiraz solid device. Such a system shelf arrangement intensive, high utilization of space, suitable for storing large quantities of the same type less variety of goods, the goods can be removed from the same side of the deposit, but also can be deposited from one side of the other side removed.
-
Previce：Through shelvesNews：Through shelves
